Telecast SHED HDX
SHED stands for SMPTE Hybrid Elimination Device, and that is what it is. It is a small adapter that allows you to use ordinary single-mode optical fibre for your HD, 4K and slow-motion camera links and in your venue/facility infrastructure, and eliminate bulky hybrid wire/ fibre. SHED adapter shown with HDX camera power unit cables. Use two small adapters — one at your base station and one at your camera — and locally power your camera, or use the HDX unit to power the camera through the hybrid tail cable. With the SHED units you can support several cameras on one lightweight fibre cable. Allows the use of conventional single-mode fiber cable Uses common SMPTE ST 304 connectors for a hybrid link Extends manufacturer’s distance limits of the camera/CCU Supports Sony cameras Built-in optical power meter Cameras Supported: Sony 1500/1500R/2500/4300 PRODUCT MANUAL
Read more
Telecast SHED Passive
Passive version of the Telecast SHED allowing for the conversion from a LEMO SMPTE connector to ST tactical one. PRODUCT MANUAL
Read more
Telecast Viper HD
The Telecast Viper HD is a mutli-signal throw-down fibre transport system. Over 4 cores the system provides the following: 4 x HD Video 8 x Audio Mic/line Level 2 x 4-wire 1 x Ethernet 4 x RS232 Data
Read more
TP Link Gigabit Ethernet Converter
The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data. Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers(9.3 miles). Complies with IEEE 802.3ab and IEEE 802.3z Provides switch configuration of Force /Auto transfer mode for FX port Extends fiber distance up to 15km(9.3 miles) PRODUCT MANUAL
Read more
Telecast Adder 8/8 Line Level Audio
The Telecast Adder provides 8, bi-directional line level audio signals over 2 singlemode fibres. 8/8 Line Level Audio Signals Redundant Power Optical Power Meter on board signal generator CWDM multiplexing
Read more
Telecast Diamondback 8-Way
The Telecast DiamondBack2 system consists of a dual optical output fiber optic transmitter/multiplexer (TX) and a mating receiver/demultiplexer (RX). The TX unit multiplexes and launches simultaneously onto the fiber up to eight NTSC/PAL/SECAM video signal channels plus a ninth auxiliary port for compatible data use only. The compatible devices include the Telecast Adder 161 and Adder 882i, which mux audio and data/switch or intercom and data/switch information onto a coax to the BNC input on the DiamondBack2 TX. 8 X PAL/NTSC/SECAM Signals Redundant Power PRODUCT MANUAL
Read more
Telecast Diamondback 4/4
The Telecast DiamondBack2 system consists of a dual optical output fiber optic transmitter/multiplexer (TX) and a mating receiver/demultiplexer (RX). The TX unit multiplexes and launches simultaneously onto the fiber up to eight NTSC/PAL/SECAM video signal channels plus a ninth auxiliary port for compatible data use only. The compatible devices include the Telecast Adder 161 and Adder 882i, which mux audio and data/switch or intercom and data/switch information onto a coax to the BNC input on the DiamondBack2 TX. 4, bi-directional X PAL/NTSC/SECAM Signals Redundant Power PRODUCT MANUAL
Read more