Back to Grip
Vinten Levelling Bowl Adaptor
This adaptor allows a pan and tilt head with a 150 mm ball base to be installed on a standard Vinten four-hole base. It may also be secured using a ‘Quickfix’ adaptor.
Related products
Viewfinder Sidemount
These mounts fix, from underneath, to any of the 3/8 whit tapped holes in the camera base plate, to the front or rear. N119 accommodates the mini wedge used by Sony and Philips. It may be fitted on either side of the camera. The end plate can be used for squaring the arm. The viewfinder may be adjusted sideways after fitting the mount.
Vinten Vision 100
The Vision 100 fluid head can take advantage of almost all of the tripod's weight capacity with its maximum 44.1-pound load. The controls for drag are illuminated for use in dark conditions and the counterbalance control uses a digital readout, allowing for repeatable balance settings to best fit your camera. When folded down for transport, the entire system can be compacted to just under 34" and weighs in at 22.2 pounds. This system includes a ground level spreader and a soft sided carry case to protect your gear during transport and storage.
Vinten Quickfix Adaptor
Vinten Heavy-Duty Quickfix Adaptor for Heavy-Duty Tripods and Pedestals. The time taken for set-up and breakdown is wasteful, which is why Vinten have developed the range of Quickfix adaptors. Constructed entirely from corrosion resistant components, Quickfix adaptors are ideal for OB applications.
The heavy-duty Quickfix adaptor has an extended capacity range of up to 100 kg / 220.5 lbs and is compatible with the Heavy Duty Tripods as well as all Vinten pedestals.
Vinten 200mm Hi-Hat
Vinten Adaptor 200mm Hi-Hat - 4-bolt flat base to 4-bolt flat base. This adaptor provides a 200 mm (7.9 ") height extension for any tripod or pedestal with a standard four-hole fixing.
