Back to Grip
Viewfinder Sidemount
These mounts fix, from underneath, to any of the 3/8 whit tapped holes in the camera base plate, to the front or rear. N119 accommodates the mini wedge used by Sony and Philips. It may be fitted on either side of the camera. The end plate can be used for squaring the arm. The viewfinder may be adjusted sideways after fitting the mount.
Related products
Vinten Vector 430 Pan Tilt Head
The Vector 430 supports compact box lens and large EFP barrel lenses. Its compact and lightweight design perfectly balances an extremely large capacity range of 10-43 kg / 22-94.8 lbs, making it the single choice when previously two heads were required and perfect for multi-camera productions.
Features:
- Outstanding whip pan control
- ±90° tilt range across a wide payload range
- Ergonomic positioning of controls
- Digital balance readout for quick repeatable set-ups
- Tilt centrelock to safely swap high payloads
- Back lit controls for low light conditions
Specification:
- Payload 10 kg to 43 kg
- Platform adjustment +55 to -107
- Tilt adjustment ±40° to ±90°
Vinten Vision 100 Pan Tilt Head
The Vision 100 fluid head can take advantage of almost all of the tripod's weight capacity with its maximum 44.1-pound load. The controls for drag are illuminated for use in dark conditions and the counterbalance control uses a digital readout, allowing for repeatable balance settings to best fit your camera. When folded down for transport, the entire system can be compacted to just under 34" and weighs in at 22.2 pounds. This system includes a ground level spreader and a soft sided carry case to protect your gear during transport and storage.
Features:
- Digital balance readout for quick repeatable set-ups
- Instant responsiveness from Perfect Balance
- Thin Film drag (TF) for outstanding whip pan in any condition
- High contrast amber LED levelling bubble for quick, precise set-up
- Extensive operating temperature from -40°C to +60°C
Specification:
- Bowl size 100 mm
- Payload 7 kg to 20 kg
- Platform adjustment +45 to -70
- Tilt range to ±90°
Vinten Two Stage Pozi-Loc Tripod
150 mm bowl EFP tripods are designed to offer maximum stability and robustness and are ideal for demanding field and studio applications where a longer lens and heavier viewfinder are used.
The Pozi-Loc cam-operated clamping system requires low effort with a 90° turn from on to off, providing the user with a positive indication that the tripod is securely locked. The profile of the knob ensures that camera cables cannot snag.
The 'Baby Legs' tripod is a low-level version, with a minimum height of 28 cm (11 in.) which makes even lower shots possible.
Pozi-Loc clamps
Mid-level spreader available
PRODUCT MANUAL
Vinten Levelling Bowl Adaptor
This adaptor allows a pan and tilt head with a 150 mm ball base to be installed on a standard Vinten four-hole base. It may also be secured using a ‘Quickfix’ adaptor.