Back to Vision
TV Logic LUM-242H Monitor
The LUM-242H is a 24 inch monitor with UHD resolution (3840 x 2160), high luminance up to 1,000cd/㎡, a 10-bit color depth, high contrast ratio of 1,000 : 1 and wide viewing angle. The LUM-242H supports various standard color gamuts including 90% DCI-P3 coverage. It supports 12G-SDI signal with 4 BNC input connectors (2 for 12G-SDI and 2 for 3G-SDI) and an HDMI 2.0 input.
Related products
Plexsis 8-Way 4K
Plexsis provides transport of 8 SDI (HD, 3G and SD) signals over a single optical fibre, and up to 16 when linking two systems, the Plexsis is available in two configurations (8 channels on one direction or 4 in both directions), with each of these available in the high or low wavelength band. All SDI ports are fully re-clocked, meaning that jitter caused by long coaxial runs will not affect the maximum optical run length and vice versa.The front panel OLED screen displays optical power, SDI signal presence, temperature and system voltages, and alarms can be set up to trigger an audible tone or relay contact closure, giving peace of mind when it comes to detecting and resolving distance, grounding and interference issues.
8 x 3G-SDI over one fibre
Automatic cable equalisation
Multi-rate re-clocking with automatic rate detection
Both AC and DC power inputs provides flexibility and power redundancy
Supports SD, HD and 3G SDI
Wide DC input range 9-36V
Full colour front panel display
Optical expansion port
PRODUCT MANUAL
TP Link Media Converter
The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers(9.3 miles).
Complies with IEEE 802.3ab and IEEE 802.3z
Provides switch configuration of Force /Auto transfer mode for FX port
Extends fiber distance up to 15km(9.3 miles)
PRODUCT MANUAL
Blackmagic 12G Dual Channel
Blackmagic Design Mini Converter Optical Fibre 12G - Bi-Directional SDI to Optical Fibre
Mini Converter Optical Fibre 12G converts SDI to optical fiber and optical fibre to SDI in both directions at the same time, you can even have different video standards going in each direction. The 12G‑SDI connections are multi rate, which makes it compatible with all SD, HD and Ultra HD formats and equipment up to 2160p60, including Level A and B devices. You can install any standard 3G, 6G or 12G‑SDI SFP optical fibre module so you can send SDI using the same low cost optical fiber cables that are commonly used for computer networks.
Bluebell Dual Channel 4K
The Dual channel Bluebell is a transmitter module for the conversion of 12G-SDI signals into fibre optical cable. The incoming signals are auto-sensed and then equalised prior to conversion and transmission down a single optical fibre. All Bluebell products are designed to retain maximum integrity of the signal path offering excellent jitter free optical transport. A loop out is provided for signal monitoring or distribution.
The kits are extremely compact single channel fibre optic converters that are perfectly suited to provide interference free transmission and for extending the range of electrical signals, particularly 12G-SDI signals.
Dual Channel Inputs
Single Optical Fibre
Low Jitter
PRODUCT MANUAL
